Aton G2 Swivel with Load Leg Base
-
New
Tap
Pinch
to Zoom
Color:
Moon Black
CYBEX Gold
Aton G2 Swivel with Load Leg Base
Delivering unparalleled safety, the CYBEX Aton G2 Swivel has 180° rotation for maximum convenience. When the car seat is installed in the vehicle, the swivel base lets you rotate the seat towards you, making it easier than ever to load and unload your child.
Read more
In Stock
$549.95
free shipping for a short time
free shipping for a short time
or
Approx. 110 points when purchasing this product
Free shipping
Membership is free
Quick Links
1 Awards & Certifications
Tap
Pinch
to Zoom
Product Code:
524002351 (Moon Black)
Product Details
Specifications:
- Age Range: From newborn up to approx. 18 months
- Child Height: max. 32"
- Child Weight: From 4 lbs. up to 30 lbs.
- Group: Infant Car Seat
- GREENGUARD Gold Certified
- Complies with new FMVSS213 side impact and frontal impact standard safety standards
Travel Light. Travel Safe.
The CYBEX Aton G2 Swivel redefines convenience with its 180° rotation, making it effortless to load and unload your child. Advanced safety features, including an Anti-Rebound base with Load Leg and Linear Side-Impact Protection, work in harmony to significantly reduce collision forces acting on the child in the event of an impact. Designed to be lightweight and ergonomic, it also boasts an adjustable headrest, no-rethread harness, air ventilation, and a SafeLock Belt Tensioner for a quick and secure installation. Experience unparalleled safety and ease with the Aton G2 Swivel.
Care Instructions:
- Machine wash separately in cold water, delicate cycle. No bleach. Drip Dry. Do Not Iron.
Compatible with:
- All Cybex Strollers
- Aton G2 Load Leg Base
- Aton G2 Swivel Load Leg Base
- Infant Car Seat Sun Shade
- Infant Car Seat Insect Net
- Infant Car Seat Rain Cover
*As compared to the same car seat without this feature.
180° Swivel
180° rotation on the swivel base makes it easy and ergonomic to load and unload your child from the car seat when it's installed in the vehicle.
Lightweight Design, Advanced Safety
With its lightweight design, the Aton G2 Swivel is one of the easiest infant car seats to install and carry, without compromising on safety.
SensorSafe Smart Technology
With SensorSafe, you’ll receive real-time updates on your child’s well-being. This Bluetooth-enabled SensorSafe clip sends alerts straight to your mobile app if the chest clip becomes unbuckled, if the backseat temperature is too hot or cold, or if the child is unintentionally left behind.
Measurements
- Length
- 26.1 in
- Width
- 17.5 in
- Height
- 14.7 - 22.8 in
- Weight
- 9 lbs
What is included?
- Aton G2 Swivel
- Aton G2 Swivel Load Leg Base
- SensorSafe
- Infant Insert
- Owner's Manual
Downloads
Where can I get replacement parts for my product?
You can order replacement parts from our customer service team at ParentLink. Please contact them at info.us@cybex-online.com or by calling 1-877-242-5676.
Which CYBEX strollers are compatible with this car seat?
The infant car seats from CYBEX have been specially developed as part of a flexible travel system. This means that this car seat can be used with any CYBEX stroller with the adapters that come included in the stroller.
What is the main difference between Aton G Swivel and the Aton G2 Swivel seat?
The main difference is the load leg on the base and updated collecition fabrics. Our updated fabrics feature a fresh, modern color palette and breathable mesh to keep your baby comfortable during every ride.
Can my child sit in the car seat in a forward-facing position?
The American Academy of Pediatrics and the National Highway Traffic Safety Administration recommend that children ride rear-facing as long as possible, until they outgrow the height or weight limits of their rear-facing car seat. This CYBEX infant car seat is designed to be used ONLY in the rear-facing position and may never be used forward-facing in a vehicle.
Can I also use the this seat without the base?
Yes, this infant car seat is equipped with alternate belt guides that make it commuter friendly and can be safely installed without the need for the base. You will want to ensure that the vehicle belt buckle and hardware do not interfere with the infant carrier as well as make sure that you only install with a locking vehicle lap/shoulder belt. Please reference the pages in your owner's manual that review proper installation without the base for this car seat using the lap/shoulder belt.
Where can I check to make sure my car seat is installed properly?
CYBEX recommends getting your car seat installation checked by a Certified Child Passenger Safety Technician. At CYBEX we have certified car seat technicians available to assist you though our customer service team at ParentLink at 1-877-242-5646 or info.us@CYBEX-online.com. We also have virtual appointments available at https://CYBEX.appointlet.com/.
Is it safer to use lower anchors or the vehicle's seat belt?
The safest installation method is the one that allows you to install the car seat correctly. Either method, if used in accordance with the car seat owner's manual and vehicle's owner’s manual requirements, provides protection. The car seat has been tested to meet safety standards installed by either method. Most car seats have lower anchor weight limitations, so please refer to your car seat owner's manual for those specific limitations.
How do I know if I have LATCH available in my vehicle to install the car seat?
Most U.S. vehicles manufactured on or after September 1, 2002, are equipped with LATCH. Refer to your vehicle owner’s manual under the Child Restraints section to confirm and see where your latch connections are.
What is the difference between Rigid Latch vs Flexible Latch?
Flexible lower anchor connectors are connected to each other with flexible webbing. Rigid lower anchor connectors are rigidly attached to the car seat shell or car seat base and there is no flexible webbing. Rigid lower anchor connectors are spaced exactly 11 inches apart to correspond with the standard spacing of lower anchors in the vehicle. CYBEX allows flexible lower anchors to be used with spacing between 11 - 20" apart and given the vehicle manufacturer allows this use.
Can I use the Aton G2 Swivel base for my Aton G2 infant seat?
Yes, new Aton G2 seats can mix and match bases between the standard Aton G2 Base or the Aton G2 Swivel Base.
Is it ok to leave my child in the infant car seat when I arrive to my destination?
Car seats are designed for safety during vehicle travel. It is important that children are removed from the car seat when travel has ended.
What kind of clothing should my child wear when seated in the car seat?
Thick clothing prevents the harness from lying snugly against the body. This incorrect harness use results in a loose or slack harness which in turn reduces the performance of the child restraint in crashes. Also, in everyday use, the loose harness could result in the harness slipping off the child's shoulders. For this reason, your child should wear everyday clothing. Thick clothing, such as puffy jackets, should not be worn in the car seat. In cold weather, after your child has been harnessed in the car seat, their jacket or a blanket can be placed over the child for extra warmth.
Can I use this seat on a flight?
Yes, this seat is approved for use on an airplane according to the requirments of the Federal Aviation Administration (FAA). The FAA recommends that you secure your child for air travel in an appropriate Child Restraint based on your child's weight and size. Turbulence can happen with little or no warning. When turbulence occurs, the safest place for your child is in a properly installed Child Restraint instead of in an adult's lap or on the aircraft seat with its seat belt. Keeping your child in a Child Restraint during the flight will help ensure your family arrives safely at your destination. Please contact your airline before departure to make sure this restraint meets their requirements. Always refer to your Child Restraint owner's manual for aircraft installation.
Can I leave my Aton G Swivel seat in the swiveled position after taking my baby out?
Yes, as long as the car will remain parked, and you're not planning on driving to another destination. If you swivel the base and remove the child or infant carrier and intend to continue traveling, you must rotate the base back into the drive position.
Can I used a rolled towel or pool noodle under the base of my car seat to achieve the correct recline angle?
In some vehicles, even when your car seat is in the most reclined position, it may be necessary to place a rolled towel or pool noodle beneath (not behind) the car seat near the vehicle seat back to provide enough recline so that the recline indicator is in the correct zone for rear-facing use. For an infant car seat with the base, the adjustable foot should be stored before adding the rolled towel or pool noodle. For a convertible or all-in-one car seat, make sure the car seat is set in an appropriate rear-facing recline position, and then add the rolled towel or pool noodle. For additional details, please refer to your product instructions or contact our ParentLink customer service team.
Is it ok if there is a gap between the anti-rebound bar on my infant seat and the back of my vehicle seat?
The most important thing is to get a good installation using either LATCH or the vehicle seat belt. After properly installing the car seat, check to make sure you have less than 1” of movement at the belt path as indicated in your user manual. As long as you have achieved a tight installation, a small gap between the anti-rebound bar and back of the vehicle seat is acceptable. If your vehicle seat has an adjustable seat back, you may be able to adjust it more upright, which can also help limit the gap between your car seat and vehicle seat.
Can the car seat be used in a seating position that has a side airbag?
Yes, the car seat can be used in the seating position adjacent to a side airbag unless otherwise indicated in the vehicle owner's manual.
When does my CYBEX infant car seat expire?
You can find the date of manufacture and expiration date on a sticker located on the bottom of your CYBEX infant seat. Every car seat has an expiration due largely to allow you the benefit of regulatory changes and technology enhancements in child passenger safety. This infant seat has been certified for 6 years from the date of manufacture. Once your car seat has reached its expiration date, we recommend recycling the seat by contacting your local community recycling center.
Is it ok to keep using my CYBEX car seat after an accident?
We at CYBEX always ADVISE that you MUST replace a child restraint after a crash of any kind, even if it was unoccupied. A crash can cause unseen damage to the child restraint that may not be visible, and this damage can pose an increased risk to safety. Your insurance company may be able to provide some assistance in replacing the child restraint. For more info, please reach out to our Customer Service team at info.us@cybex-online.com or by calling 1-877-242-5676.
When should I remove the Infant Insert?
The infant insert will help provide a better harness fit for smaller babies, as well as stability for the torso. We recommend using the infant insert until your child reaches a weight of 11 lbs. or about 3 months old. When used with a smaller child, the infant insert side wings can be folded in for better support and optimal fit.
How long should I keep my child rear facing for?
The head of a young child is large and heavy in proportion to the rest of their body and their neck is relatively weak. A rear-facing child restraint supports the head, neck, and spine, and therefore may help reduce the risk of serious injury. We recommend keeping your child rear facing in a properly installed car seat as long as possible, until they reach the highest weight or maximum height allowed by the seat in the rear-facing position.
When is a child too big for their CYBEX infant car seat?
This infant seat is designed for babies from 4-30 lbs. and up to 32" tall. In addition, you will want to ensure that the top of the child's head is a minimum of 1 inch below the top of the infant carrier. This allows for proper protection in the event of a crash. Each CYBEX infant car seat provides maximum height and weight measurements. Once the child has met any of these three criteria, they have outgrown the seat and should transition to rear-facing in a convertible or all-in-one seat as long as the seat allows, according to the manufacturer's specifications, before turning them around to ride forward-facing.
When would I use the swivel function?
The ideal use for this function is when your child is a bit older and carrying them in the car seat is getting too heavy. With the swivel base, you now have the option of conveniently turning the baby toward you to easily remove them and put them in a stroller. You can also remove your younger infant that is less than 20 pounds and put them directly in a compatible carry cot on one of our strollers.
Can I swivel the car seat while the car is in motion?
Neither the infant seat nor the base should be turned or swiveled while the car is in motion.
When is a child too big for their CYBEX infant car seat?
This infant seat is designed for babies from 4-35 lbs. and from 17" to 32" tall. In addition, you will want to ensure that the top of the child's head is a minimum of 1 inch below the top of the infant carrier. This allows for proper protection in the event of a crash. Each CYBEX infant car seat provides maximum height and weight measurements. Once the child has met any of these three criteria, they have outgrown the seat and should transition to rear-facing in a convertible or all-in-one seat as long as the seat allows, according to the manufacturer's specifications, before turning them around to ride forward-facing.
Can I use my CYBEX infant seat to create a travel system with another brand's stroller?
Our CYBEX strollers come with CYBEX infant seat adapters. Each stroller manufacturer determines what seats are compatible on their stroller. There are select brands of strollers that can accommodate a CYBEX infant seat with their own special adapters. Please refer to the user manual for the stroller that you are considering using with your CYBEX infant seat and if they carry car seat adapters that are compatible.
Are both linear side-impact protectors (L.S.P.s) needed?
The Linear Side-impact Protection (L.S.P.) reduces the forces of a side-impact collision and thus also the risk of injury. For an active L.S.P. you ONLY deploy the L.S.P. towards the vehicle door. You never deploy it towards the center of the vehicle. Also, do not use the L.S.P. when installing the car seat in the middle seat of the vehicle. The only exception to a middle seat installation are boosters where the L.S.P. is in a static or fixed position on the side wings or on an infant seat shell and you don't have to do anything to deploy them.
What does FR Free Fabric mean?
All car seats must pass the federal safety standards for flame resistance, this seat passes the same standard by using a special naturally flame-resistant fabric instead of adding additional fire-retardant chemicals to the fabric.
How do I use the LSP on my Aton G Infant Seat?
On the Aton G, the L.S.P. is in a static or fixed position on the sides of the infant seat shell and you don't have to do anything to deploy them.
What is the benefit of a load leg on my car seat?
The main beneift of a load leg is increased crash protection, especially in a frontal collision. It helps by creating a third point of contact in the vehicle when extended down the vehicle floor. In a crash, it helsp reduce the forward rotation of the car seat, which lowers the forces on the baby's head, neck, and spine. It can also reduce rebound improving overall stability.
Browse our Spare Parts category to purchase available items directly. If you cannot find the specific part you are looking for, please reach out to us via the Contact Form.
For warranty claims on products purchased from our Online Shop or our retail partners, please contact our Consumer Services department using our Contact Form. We will do our best to assist you.
Compare Car Seats
Make the best choice by comparing this car seat with other models we have available.
Find Your Ideal Car Seat
Use our Product Advisor to get a car seat recommendation in minutes, tailored to your needs.
There’s More to Explore
Still curious? Discover more about this product on our Explore page.
-
Didn’t help
-
Perfect
Was this page helpful?
Rate with a smile – we’re always looking to improve. Your feedback makes all the difference.