Aton 5

De Aton 5 autostoel voor baby's maakt reizen veilig en comfortabel. Uitstekende resultaten in de 05.2017 Stiftung Warentest.
  • Leeftijd max. 18 mnd
  • Gewicht max. 13 kg
  • 45 - 87 cm

Niet meer beschikbaar

Maar we hebben een nieuwe versie voor u klaarstaan
Ontdek nieuwe versie
Quick Links

Productcode:

520000163 (Navy Blue)

Productgegevens

In het voetspoor van zijn voorgangers, zoals de bekroonde Aton 2, groep 0+ testwinnaar in de Stiftung Warentest van 6/2012, voegt de Aton 5 nog meer functies toe de succesvolle Aton-serie aan.

Uitgelichte functies:

  • Verwijderbaar stoelinzetstuk voor een liggende positie
  • In 8 posities in hoogte verstelbare hoofdsteun met geïntegreerde harnasgeleiders
  • Linear Side-impact Protection (LSP-systeem)
  • Geïntegreerd XXL opvouwbaar zonnescherm met UPF50+ bescherming tegen de zon

Veilige en comfortabele reisgezel

De unieke veiligheidsfuncties, zoals de in hoogte verstelbare hoofdsteun met geïntegreerde harnasgeleiders, die de voortreffelijke bescherming bij ongevallen van de energie-absorberende buitenkant gecombineerd met het in een crashtest geteste LSP-systeem nog verder verbeteren, en de nieuwe comfortfuncties, zoals het enorme XXL zonnescherm, vormen samen een perfecte draagzak voor premature en zeer kleine pasgeboren baby’s. Een nieuwe functie zorgt voor een ideale zithoek en zorgt ervoor dat het hoofd, de nek en de borstkas van kleine baby's perfect zijn uitgelijnd. Het risico op verstikking door het naar voren vallen van het hoofd wordt daardoor aanzienlijk verminderd. De autostoel voor baby's kan met een gordel of met een van onze optionele bases worden gebruikt voor een eenvoudige bevestiging.

Technische specificaties:

  • UN R44/04
  • Groep: Gr. 0+
  • Gewicht: 0 – 13 kg
  • Leeftijd: Vanaf de geboorte tot ongeveer 18 maanden

Functies:

  • LSP-systeem
  • Verwijderbaar stoelinzetstuk
  • In hoogte verstelbare hoofdsteun (8 posities)
  • Geïntegreerd XXL opvouwbaar zonnescherm
  • Energie-absorberende buitenkant
  • CYBEX reissysteem
  • Zachte gevoerde stoelinleg

Onderhoudsinstructies:

  • Stoffen hoezen machinewasbaar op 30°C

Compatibiliteit:

  • Aton Base 2-fix, Aton Base 2

Installatie met base (optie 1): De babystoel met ISOFIX-base kan niet onbeperkt in alle voertuigen worden gebruikt. Controleer de compatibiliteit van je auto. Als je auto niet in de lijst staat, neem dan contact op met onze klantenservice.


Installatie met gordel (optie 2): De babystoel kan op alle autostoelen met automatische 3-puntsgordel worden gebruikt.

LSP-systeem
LSP-systeem
Het Linear Side-impact Protection (LSP-systeem) absorbeert de impact bij een zijdelingse botsing samen met de energie-absorberende buitenkant. De eerste schok bij een ongeval wordt door het Linear Side-impact Protection-systeem (LSP-systeem) en zijn uitschuifbare bescherming verspreid en door de flexibele structuur van de stoel geabsorbeerd. Het flexibele materiaal en de flexibele structuur van de autostoel voor baby's absorbeert en leidt de schokkracht vervolgens weg van de baby.
Verwijderbaar stoelinzetstuk
Verwijderbaar stoelinzetstuk
Een van de grootste uitdagingen voor veiligheidsingenieurs is hoe premature baby's en hele kleine pasgeborenen, van wie de nekspieren en reflexen nog niet goed genoeg ontwikkeld zijn, zo goed mogelijk vervoerd kunnen worden. Helaas kan dit ertoe leiden dat het hoofdje van de baby tijdens het slapen naar voren kantelt, wat tot ernstige ademhalingsproblemen kan leiden. Samen met Duitse dokters en vroedvrouwen, en rekening houdend met de bevindingen van vele tests, is er een functie ontwikkeld die een bijna vlak liggende hoek tussen hoofd, nek en borst mogelijk maakt. Het risico op verstikking wordt daardoor aanzienlijk verminderd. Dit wordt bereikt door een verwijderbaar stoelinzetstuk. Als hij wordt verwijderd biedt het grotere kinderen bovendien meer ruimte en comfort.
In hoogte verstelbare hoofdsteun
In hoogte verstelbare hoofdsteun
Een hoofdsteun met 8 posities met geïntegreerde harnasgeleiders vormt een ander kenmerk van de optimale bescherming tegen zijdelingse botsingen van de draagzak voor baby's. De hoogte van het harnas wordt automatisch aan de hoogte van de hoofdsteun aangepast, waardoor het gedoe met het los en vastmaken van de riemen tot het verleden behoort. Het Y-harnassysteem heeft zich bewezen als een zeer effectieve en comfortabele veiligheidsoplossing, vooral voor hele kleine baby's. De zachte stoelinleg die aan de hoofdsteun is bevestigd, kan ook gebruikt worden om de hoogte van het bekken van de baby te regelen.
 

Videos

Afmetingen

Lengte
640 mm
Breedte
430 mm
Hoogte
390 - 560 mm
Gewicht
4.8 kg

What is included?

Wat is inbegrepen?

  • Aton 5 autostoel voor baby's
  • Inlegstuk voor pasgeboren baby
  • Stoelinzetstuk
  • Gebruikershandleiding

Controleer de compatibiliteit van je auto
Om er zeker van te zijn dat deze autostoel geschikt is voor installatie in jouw voertuig, gebruik je onze Car Compatibility Checker.

Downloads

Before purchase

How do I know if my car seat is suitable for an aircraft?

You can determine if your car seat is aircraft approved if it has the TÜV Rheinland seal with the reference “For Use in Aircraft”. Car seats with this seal are specifically tested for safety and use with a two-point harness system, as found in an aircraft. Please note, that not every airline recognizes this seal as valid, therefore it is essential to refer to your airline’s regulations to confirm whether you can use your seat, even if the seat has the seal of approval.

General

How do I know when my child needs to change to the next car seat?

We generally advise against switching from an infant car seat (Gr. 0+, 0–13 kg, birth up to approx. 18 months) to the next seat prematurely. Even if your child’s feet protrude outside the infant car seat or your baby can already sit up, your child has not necessarily grown out of the seat. However, if your child's head is protruding above the top edge of the seat and he or she weighs over 13 kg, it is time to change the seat, as it no longer provides sufficient protection to the vulnerable neck and head area.

Can I use this car seat on a flight?

No, this car seat is not approved for use on an airplane.

Can I also use the infant car seat without the base?

Yes, your infant car seat can be installed in a car without using a base: In this instance, the car seat is installed using the vehicle belt. This is useful when travelling in a taxi or a second car. However, we recommend using the infant car seat in conjunction with the base, for better safety and stability. If installing the infant car seat on the front passenger seat, it is important to ensure that the front airbag has been deactivated.

Is it ok to keep using a car seat after an accident?

We at CYBEX strongly recommend that you replace a car seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a car seat after an accident. These cracks can pose an increased risk to safety.

My car seat is faulty, how can I get it repaired?

Please refer to the retailer where you bought your CYBEX car seat. They will deal with the matter on your behalf.

Where can I get replacement parts for my product?

You can order replacement parts from a specialist retailer near you. To find a store near you, simply go to the Store Locator on the CYBEX Website.

When should I remove the newborn inlay?

The inlay can be removed after approx. 3 months to provide more room for your growing baby. For more details on how to remove the newborn inlay, please refer to the User Guide.

How do I correctly secure my child in the seat?

Please observe the instructions in the User Guide. Adjust the child car seat to the size of your child and make sure that he or she is properly strapped in to ensure maximum safety.

Can I wash the newborn inlay and car seat cover in the washing machine?

Yes, both are washable. We recommend using a delicate wash cycle and a maximum temperature of 30 degrees Celsius. Detailed instructions can be found in the User Guide.

Can I also use the infant car seat in a car without ISOFIX anchorage points?

When this infant car seat is used in conjunction with a base, it can only be installed either in i-Size approved vehicles or in vehicles with ISOFIX anchorage points. If you are installing the car seat with the vehicle’s 3-point belt, ISOFIX anchorage points are not required. Before purchasing the seat, please refer to the Car compatibility list on our website to see whether or not the car seat is compatible with your vehicle.

How can I clean my car seat?

Car seats can be cleaned using a vacuum cleaner or damp cloth. Sand or other dirt beneath the cover can also be removed in this way. To clean the plastic parts of the car seat wipe them with a cloth using a mild detergent and warm water. (Warning: Please do not use chemical detergents or bleaching agents under any circumstances.) Please note that a car seat should never be dismantled for cleaning. Please always refer to your car seat’s User Guide when carrying out care and maintenance on your car seat. Generally the seat covers are machine washable at a maximum temperature of 30˚C on a delicate cycle. If you wash them at a higher temperature, the cover fabric might lose its color or shrink. Please wash the cover separately and never dry it by machine or in direct sunlight. (Warning: Only the cover of the car seat can be machine washed. The car seat itself is not machine washable.) Should you wish to clean a car seat more thoroughly than recommended above, you will have to have it cleaned professionally. Please ask the retailer who sold you the car seat to refer you to a professional service.

Installation and Securing your child

When I install the car seat using the vehicle belt, my baby’s head nods forward onto his/her chest even though the seat appears to be positioned horizontally. How can I prevent this?

If your child’s head is nodding forwards while sat in the infant car seat belted with the vehicle belt, this may indicate that the infant car seat is not positioned at a horizontal level, even though the symbol on the seat seems to indicate that it is. One reason for this is that many vehicle seats have a relatively steep incline, especially in smaller vehicles. Therefore, when installing the infant car seat it is best to use the level of the road as a guide to the correct level of the car seat, rather than the angle of the vehicle seat. If your baby’s head continues to nod forward even when the seat is aligned with the level of the road or you are using the base then it is possible that the baby is not wearing suitable clothing. Please refer to the question: What kind of clothing should my child wear when seated in the car seat.

Can I install a rear-facing seat on the front passenger seat?

Rear-facing car seats must only be installed on the passenger seat if the front airbag has been deactivated. Placing your child on a passenger seat with an activated airbag poses an enormous risk of injury, and we at CYBEX strictly advise against this. For other types of car seats check the user manuals of both your car seat and your vehicle to find out if you should deactivate the airbag. Statistics show that the safest place for a car seat is on the rear seat behind the front passenger seat. Side airbags do not put your child’s safety at risk. If you have no choice other than to use the front passenger seat, please ensure that the seat is pushed back as far as possible and that the airbag is deactivated.

How should the headrest be adjusted?

Only a headrest adjusted to the optimum height will give your child the best possible protection and comfort. The height can be adjusted to various positions. The headrest must be adjusted so there is no more than 2 cm between the child’s shoulders and the bottom of the headrest.

Can I use the car seat on laterally-facing vehicle seats?

It is not permitted to use the car seat on laterally-facing vehicle seats.

Can I use the car seat on rear-facing vehicle benches (e.g. in vans or minibuses)?

No. As you can only use this car seat rear-facing, it cannot be used on rear-facing vehicle benches. A rear-facing car seat on a rear-facing vehicle bench would be front-facing when installed.

What should I bear in mind when installing the car seat in my vehicle?

Before purchasing the car seat, it is important to check if it is approved to be used in your vehicle. Either scan the dedicated QR-Code in your "Quick Start Guide" or use the specific weblink provided on the Packaging Box, to access the Car Compatibility Tool of your product. (please do not use any part of this car seat on its own or in combination with boosters, backrests or headrests from other manufacturers or from different CYBEX product lines). The car seat can be used only on vehicle seats which are equipped with an automatic 3-point vehicle belt. For proper protection of your child, it is essential to use and install the car seat according to the instructions given in the User Guide. It can be downloaded via the CYBEX Website.

Can I install this infant car seat on the front passenger seat?

This infant car seat should only be installed on the passenger seat if the front airbag has been deactivated. Important: According to rules of the road such as the Highway Code in the UK, it is forbidden for your child to travel on a seat with an activated airbag. Placing your infant on a passenger seat with an activated airbag puts your child at risk of serious injury. If you have no choice other than to use the front passenger seat, please deactivate the airbag and ensure that the seat is pushed back as far as possible. As a rule we always recommend installing the car seat on the vehicle’s rear seat (if possible behind the passenger) as statistics show that this is the safest place in the car. In a head-on collision, a child will be protected by the larger crumple zone of the rear seat where front airbags do not put your child’s safety at risk.

Where should I install a car seat in my car?

Although it may be possible to install a CYBEX car seat on other seats in the vehicle, the safest place for a car seat is in the rear seat, behind the front passenger seat. We advise you to refer to the Car Compatibility Tool on the CYBEX Website. You can scan the dedicated QR-Code on your Quick Start Guide or use the specific weblink, provided on the Packaging Box, to access the Car Compatibility Tool for your product.

Safe Travel

Can I use the car seat even when the side airbag is activated?

Yes, the side airbag can remain activated when using the car seat.

Are both side-impact protectors (L.S.P.s) needed?

The Linear Side-impact Protection (L.S.P.) reduces the forces of a side-impact collision and thus also the risk of injury. Generally, we advise parents to install or fold out the L.S.P. on both sides of the car seat. However, if there is insufficient space for the L.S.P. nearest the middle of the vehicle, it is not absolutely essential. For safety reasons, please ensure that the L.S.P. nearest the door is always installed or folded out.

What's the difference between UN R44 and UN R129?

To simplify the process of choosing the right car seat, regulations and norms have been implemented to guarantee general safety standards worldwide. In most parts of the world including Europe, the UN R44/04 and UN R129 testing standards are in effect. R44 classifies child restraints (car seats) according to the weight of the child. However, children grow in different ways. For example, a child might be within the weight range of an R44 seat but their head may already be reaching above the top of the seat. On the other hand, R129 child restraints are classified according to the height of the child, and also specify a weight limit. This is intended to give parents more confidence that a child restraint will fit a child during a specific growth period. The aim of R129 is to make child restraints easier to install, to incorporate side impact testing to provide better protection from side crashes and to keep children in a rear-facing position up until they are at least 15 months old. It also aims to make child restraints more compatible with vehicle seats.

When does a car seat expire?

As soon as a car seat is installed in a vehicle, it may be exposed to high temperatures and high levels of light intensity. As a result, even high-quality and extremely age-resistant plastics such as those used by CYBEX can display certain age-related alterations. To ensure the safety of your child, we strongly recommend that the seats are not used for longer than the prescribed usage periods. A car seat will be designed to keep your child safe for a specific period in their development, for example from birth to approximately 4 years old for a Sirona Series seat. Sometimes they can be used for longer, for example our products for babies and toddlers can also be used for a sibling. To find out the approximate lifespan of your CYBEX car seat, refer to the User Guide or contact our Customer Service.

Usage

Can I leave my child in the infant car seat outside the car, for example at home?

CYBEX infant car seats have been engineered to offer the best possible protection for a baby during a car ride without affecting the child´s spine in a negative way. The Cloud Series also allow a lie-flat position outside the car. However, for safety reasons we do not recommend leaving the baby sat in the infant car seat for long periods of time, whether inside or outside the car.

What kind of clothing should my child wear when seated in the car seat?

Thick clothing prevents the harness/vehicle belt or impact shield from lying tight against the body of the child. Only a correctly adjusted restraint system can offer maximum protection. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets and clothing with hoods (e.g. hoodies) as well as hats should be avoided where possible. Once your child has been positioned in the car seat, he/she can be covered with an extra blanket for warmth.

Do I need a newborn inlay for a car seat?

Yes, a newborn inlay is necessary to help very young and small babies lie in a safe and comfortable position in the car seat. These are specially designed to meet the anatomical requirements of newborn or very small babies. All CYBEX infant car seats include removable newborn inlays. Usually these can be removed when your child has reached a height of 61 cm, however always refer to the user guide provided with the product to ensure it is removed at the appropriate time.

When is a child too big for this infant car seat?

This infant car seat can be used from birth up until the child is approximately 18 months old (maximum body height 80 cm, maximum body weight 13 kg).

Garantieclaims


Als u aanspraak wilt maken op garantie, neem dan contact op met de oorspronkelijke verkoper van uw CYBEX-product.


Als u uw product direct via de CYBEX Online Shop heeft gekocht, gebruik dan ons contactformulier om contact met ons op te nemen.



Onderdelen (buiten garantie)


Als u op zoek bent naar onderdelen en uw product valt niet meer onder garantie, neem dan contact op met een erkende CYBEX-retailer in uw regio. U kunt er een vinden via onze winkelzoeker .


Weet u niet zeker of uw product nog onder garantie valt? Neem dan gerust contact met ons op – we helpen u graag verder.