För närvarande inte tillgängligt i ditt land
Utmärkta säkerhetsfunktioner och banbrytande komfortegenskaper. I testet 2015-06 utfört av tyska Stiftung Warentest kom Solution M fram som testvinnare i Grupp 2/3 (i nivå med ett annat märkes modell).
Färg: Rumba Red
En ny generation av justerbar säkerhet
Det viktigaste inslaget i säkerhetskonceptet i Solution-serien är det CYBEX patenterade nedfällbart huvudstöd. Den förhindrar smart att barnets huvud faller framåt även när det sover. En individuellt justerbar L.S.P. System med energiabsorberande sidoskydd ger skydd vid ensidokollision. Det höjdjusterbara huvudstödet, det justerbara den bekväma sittdynan, och sist men inte minst, den lätta designen erbjuder oslagbar komfort.
- UN R44/04
- Grupp: GR. 2/3
- Vikt: 15–36 kg
- Höjd: Från ca 100 upp till 150 cm
- Ålder: Från ca 3 upp till 12 år
- Tygskydden kan maskintvättas i 30 °C
- Patenterat nedfällbart huvudstöd
- Hjälper till att skydda huvudet från att falla framåt under sömnen.
- Individuellt justerbart Linjärt Sidokrockskydd (LSP)
- Det individuellt justerbara Linjära Sidokrockskyddet (LSP) (L.S.P. System) absorberar stötenergin vid en olycka i ett mycket tidigt skede. Kraften från en sidokollision absorberas systematiskt av individuellt justerbara sidoskydd samt av axel- och huvudskydden. Samtidigt absorberas kroppens kinetiska energi som orsakats av stöten direkt, varvid huvudet leds aktivt till en säker position. Linjärt Sidokrockskydd (LSP) kan justeras individuellt för att passa bilens interiör.
- Det integrerade ventilationssystemet stödjer en behaglig kroppstemperatur även under varma dagar. Ytterligare en del av komfortpaketet i Solution M är ett system av mesh-ventilationskanaler som går genom ryggstödet och säteskomponenterna. Detta säkerställer en behaglig sittemperatur även under varma dagar.
- Höjdjusterbart huvudstöd med 12 positioner
- 12-position höjdjusterbart huvudstöd för perfekt passform och maximal säkerhet…
- Extra bred och tjock säteskudde
- Med extra mjuk stoppning.
- Energiabsorberande hölje
- Den flexibla materialstrukturen absorberar stötkraften.
- Nedfällbart ryggstöd
- Passar perfekt till bilsätet
Solution M Car Seat Tutorial
- 405 mm
- 540 mm
- 625 mm
- 5.2 kg
Will this car seat fit in my vehicle?
This child car seat is approved for universal use and can be used on all vehicle seats with a standard 3-point belt. However, we always recommend a test installation at a qualified retailer to confirm compatibility with your specific vehicle. In particular, the length of the vehicle belts may vary between cars, even during a production run of a specific car. This could potentially affect the compatibility of the car seat with your vehicle.
Can I use this car seat on a flight?
No, this car seat is not approved for use on an airplane.
Is it normal that the car seat’s backrest moves, and there is space between vehicle seat and car seat?
Yes, the backrest is adjustable. Therefore it can adapt perfectly to any vehicle seat. In the event of an accident, the backrest moves slightly forward with your child, and is therefore able to secure the whole body early on.
Is it ok to keep using a car seat after an accident?
We at CYBEX strongly recommend that you replace a car seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a car seat after an accident. These cracks can pose an increased risk to safety.
My car seat is faulty, how can I get it repaired?
Please refer to the retailer where you bought your CYBEX car seat. They will deal with the matter on your behalf.
Where can I get replacement parts for my product?
You can order replacement parts from a specialist retailer near you. To find a store near you, simply go to the Store Locator on the CYBEX Website.
How do I correctly secure my child in the seat?
Please observe the instructions in the User Guide. Adjust the child car seat to the size of your child and make sure that he or she is properly strapped in to ensure maximum safety.
Is it okay to install this car seat on the passenger seat?
We generally recommend using the car seat on one of the back seats of the vehicle. Statistically, installing the car seat on the passenger seat poses a higher risk of injury for your child. However, in exceptional cases the car seat may be used on the passenger seat as well. Please note the following: if the car is equipped with an airbag, put the passenger seat as far back as possible. Please ensure that the upper belt point of the 3-point vehicle belt always stays behind the belt routing of the car seat, so that the belt runs backwards and not forwards. To find out whether a specific CYBEX car seat can be installed on the passenger seat, please check the type list included with the car seat. You can also refer to the Car Compatibility Checker on the CYBEX Website.
How can I clean my car seat?
Car seats can be cleaned using a vacuum cleaner or damp cloth. Sand or other dirt beneath the cover can also be removed in this way. To clean the plastic parts of the car seat wipe them with a cloth using a mild detergent and warm water. (Warning: Please do not use chemical detergents or bleaching agents under any circumstances.) Please note that a car seat should never be dismantled for cleaning. Please always refer to your car seat’s user manual when carrying out care and maintenance on your car seat. Generally the seat covers are machine washable at a maximum temperature of 30˚C on a delicate cycle. If you wash them at a higher temperature, the cover fabric might lose its color or shrink. Please wash the cover separately and never dry it by machine or in direct sunlight. (Warning: Only the cover of the car seat can be machine washed. The car seat itself is not machine washable.) Should you wish to clean a car seat more thoroughly than recommended above, you will have to have it cleaned professionally. Please ask the retailer who sold you the car seat to refer you to a professional service.
How should the headrest be adjusted?
Only a headrest adjusted to the optimum height will give your child the best possible protection and comfort. The height can be adjusted to various positions. The headrest must be adjusted so there is no more than 2 cm between the child’s shoulders and the bottom of the headrest.
Can I use the car seat on laterally-facing vehicle seats?
It is not permitted to use the car seat on laterally-facing vehicle seats.
Can I use the car seat on rear-facing vehicle benches (e.g. in vans or minibuses)?
Yes. You can use this car seat on rear-facing vehicle benches as long as the vehicle bench is approved for use by adults and has a 3-point vehicle belt. The headrest of the vehicle bench should not be removed when fitting on a rear-facing seat.
What should I bear in mind when installing the car seat in my vehicle?
Before purchasing the car seat it is important to check if it is approved to be used in your vehicle. We advise referring to the Car Compatibility Checker on the CYBEX Website to find out whether the car seat is compatible with your vehicle. Compatibility can also be checked with the Typelist that can be found attached to your car seat (please do not use any part of this car seat on its own or in combination with boosters, backrests or headrests from other manufacturers or from different CYBEX product lines). The car seat can be used only on vehicle seats which are equipped with an automatic 3-point vehicle belt. For proper protection of your child, it is essential to use and install the car seat according to the instructions given in the User Guide. The User Guide can be found attached to the car seat, or it can be downloaded on the CYBEX Website.
The ISOFIX System is impossible or very difficult to release from the ISOFIX anchorage points in the vehicle. What can I do?
Sometimes the ISOFIX System may be difficult to release from the anchorage points. Please increase the distance between the car seat and the vehicle seat by releasing the ISOFIX using the adjustment buttons and pulling the car seat away from the vehicle seat. By following these steps, you will release any tension from the System which should help with the de-installation.
Where should I install a car seat in my car?
The safest place for a car seat is in the rear seat behind the front passenger seat. It may be possible to install a CYBEX car seat on other seats in the vehicle. You can find this information in our vehicle Type List which is available either online or along with the product when it is purchased.
Can I install the ISOFIX System on a car seat which doesn't have ISOFIX anchorage points?
No. Car seat models without an ISOFIX System cannot be retrofitted. Please do not adapt or tamper with car seats to make them fit, as the authorities do not allow any technical changes to them.
Can I use the car seat even when the side airbag is activated?
Yes, the side airbag can remain activated when using the car seat.
Are both side-impact protectors (L.S.P.s) needed?
The Linear Side-impact Protection (L.S.P.) reduces the forces of a side-impact collision and thus also the risk of injury. Generally, we advise parents to install or fold out the L.S.P. on both sides of the car seat. However, if there is insufficient space for the L.S.P. nearest the middle of the vehicle, it is not absolutely essential. For safety reasons, please ensure that the L.S.P. nearest the door is always installed or folded out.
Do high-back booster seats perform better than booster seats?
When compared to booster seats, high-back booster seats considerably reduce the risk of injury. Booster seats do not provide proper protection from side-impacts, whereas a high-back booster seat is equipped with side protection. This protects the child from injury in the case of a side collision. High-back booster seats also include a shoulder belt routing which can be adjusted to the height of the child, further improving their travelling safety.
What's the difference between UN R44 and UN R129?
To simplify the process of choosing the right car seat, regulations and norms have been implemented to guarantee general safety standards worldwide. In most parts of the world including Europe, the UN R44/04 and UN R129 testing standards are in effect. R44 classifies child restraints (car seats) according to the weight of the child. However, children grow in different ways. For example, a child might be within the weight range of an R44 seat but their head may already be reaching above the top of the seat. On the other hand, R129 child restraints are classified according to the height of the child, and also specify a weight limit. This is intended to give parents more confidence that a child restraint will fit a child during a specific growth period. The aim of R129 is to make child restraints easier to install, to incorporate side impact testing to provide better protection from side crashes and to keep children in a rear-facing position up until they are at least 15 months old. It also aims to make child restraints more compatible with vehicle seats.
When does a car seat expire?
As soon as a car seat is installed in a vehicle, it may be exposed to high temperatures and high levels of light intensity. As a result, even high-quality and extremely age-resistant plastics such as those used by CYBEX can display certain age-related alterations. To ensure the safety of your child, we strongly recommend that the seats are not used for longer than the prescribed usage periods. A car seat will be designed to keep your child safe for a specific period in their development, for example from birth to approximately 4 years old for a Sirona Series seat. Sometimes they can be used for longer, for example our products for babies and toddlers can also be used for a sibling. To find out the approximate lifespan of your CYBEX car seat, refer to the user manual or contact our Customer Service.
What kind of clothing should my child wear when seated in the car seat?
Thick clothing prevents the harness/vehicle belt or impact shield from lying tight against the body of the child. Only a correctly adjusted restraint system can offer maximum protection. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets and clothing with hoods (e.g. hoodies) as well as hats should be avoided where possible. Once your child has been positioned in the car seat, he/she can be covered with an extra blanket for warmth.
What are the two main positions for the reclining headrest?
The patented reclining headrest is a passive safety feature from CYBEX. If your child is awake, you can set the recline angle of the headrest to the upright position. If your child is asleep, you can set the angle of the headrest to the reclined position. This prevents the child’s head from tipping forward into a vulnerable position while sleeping.
How do I install the cup holder?
You can easily install the cup holder by sliding it into one of two slots in the car seat shell, positioned on the side of each armrest. The positions of the slots are indicated by cup holder symbols.