Solution T i-Fix

La silla elevadora con respaldo alto Solution T i-Fix, que crece con tu hijo desde los tres hasta los doce años, incorpora un reposacabezas reclinable patentado y un sistema de ventilación mejorada.
Comfort:
Plus: Sepia Black (Plus)
En stock
€ 249,95
IVA incluido, el producto cumple los requisitos para el envío gratuito
IVA incluido, el producto cumple los requisitos para el envío gratuito
o
Explorar más
Un miembro del CYBEX Club puede ganar 50 puntos comprando este producto. Hazte miembro ya

Highlights

Reposacabezas reclinable patentado
Reposacabezas reclinable patentado
El reposacabezas reclinable patentado inclina la cabeza del niño ligeramente hacia atrás para evitar que caiga hacia delante mientras duerme. Así, en caso de impacto lateral, es más probable que su cabeza esté protegida: es siete veces más seguro que si la cabeza cae y sale de la zona de seguridad del asiento*. Se puede colocar en tres posiciones distintas para garantizar la comodidad de tu pequeño tanto despierto como dormido.
Crece a lo alto y ancho hasta los 12 años
Crece a lo alto y ancho hasta los 12 años
Los niños crecen muchísimo entre los tres y los doce años. Asegúrate de que la silla de coche crezca con ellos gracias a 12 ajustes de altura disponibles. Eleva los protectores de cabeza y hombros con una sola mano. El asiento se ensancha de forma automática para ajustarse rápida y fácilmente.
Ventilación integral
Ventilación integral
La ventilación integral mantiene una temperatura cómoda del asiento durante todo el año. Además, la opción con tejido Plus incluye insertos de malla para mejorar la circulación del aire y el confort. El diseño tridimensional especial de la estructura de la red multiplica la transpirabilidad por seis.**

Elementos destacados

Sistema avanzado de protección contra impactos laterales
Sistema avanzado de protección contra impactos laterales
El sistema avanzado de protección lineal contra impactos laterales (LSP) combina diseño, segurid…
Instalación sencilla y estabilidad adicional
Instalación sencilla y estabilidad adicional
ISOFIX te permite acoplar el modelo Solution T i-Fix fácilmente en el coche con un clic. Los indicadores vis…
Ajuste perfecto en todas las sillas de coche
Ajuste perfecto en todas las sillas de coche
El respaldo reclinable se ajusta perfectamente al asiento de cualquier vehícu…

Productos para combinar

    Portavasos para silla de coche - Negro

    • ÖKO-TEST 06/2032
      Lemo - Stone Blue

        Hausschwein - Blanco

        Coches compatibles

        Para confirmar si es posible instalar esta silla de coche en tu vehículo, utiliza nuestro Comprobador de compatibilidad con el coche.

        Coches compatibles.

        Medidas

        Longitud
        390 mm
        Anchura
        505 mm
        Altura
        625 - 800 mm
        Peso
        7.2 kg

        What is included?

        ¿Qué incluye?

        • Silla de coche Solution T i-Fix
        • Manual de usuario

        Descargas

        Before purchase

        Will this car seat fit in my vehicle?

        It is important to check whether the car seat is compatible with your vehicle before you purchase it. The child car seat can be installed on any vehicle seat with the ISOFIX locking arms stored, by using a 3-point automatic belt. The installation with ISOFIX is not possible in all vehicles. Please check whether the installation is allowed on the typelist included with the car seat or our Car Compatibility Checker on the CYBEX Website. If your vehicle is not listed, please contact our Customer Service team.

        General

        Can I use this car seat on a flight?

        No, this car seat is not approved for use on an airplane.

        Is it normal that the car seat’s backrest moves, and there is space between vehicle seat and car seat?

        Yes, the backrest is adjustable. Therefore it can adapt perfectly to any vehicle seat. In the event of an accident, the backrest moves slightly forward with your child, and is therefore able to secure the whole body early on.

        Is it ok to keep using a car seat after an accident?

        We at CYBEX strongly recommend that you replace a car seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a car seat after an accident. These cracks can pose an increased risk to safety.

        My car seat is faulty, how can I get it repaired?

        Please refer to the retailer where you bought your CYBEX car seat. They will deal with the matter on your behalf.

        Where can I get replacement parts for my product?

        You can order replacement parts from a specialist retailer near you. To find a store near you, simply go to the Store Locator on the CYBEX Website.

        How do I correctly secure my child in the seat?

        Please observe the instructions in the User Guide. Adjust the child car seat to the size of your child and make sure that he or she is properly strapped in to ensure maximum safety.

        Is it okay to install this car seat on the passenger seat?

        We generally recommend using the car seat on one of the back seats of the vehicle. Statistically, installing the car seat on the passenger seat poses a higher risk of injury for your child. However, in exceptional cases the car seat may be used on the passenger seat as well. Please note the following: if the car is equipped with an airbag, put the passenger seat as far back as possible. Please ensure that the upper belt point of the 3-point vehicle belt always stays behind the belt routing of the car seat, so that the belt runs backwards and not forwards. To find out whether a specific CYBEX car seat can be installed on the passenger seat, please check the type list included with the car seat. You can also refer to the Car Compatibility Checker on the CYBEX Website.

        Is it possible to use a car seat with an ISOFIX System in a vehicle without ISOFIX anchorage points?

        While this CYBEX car seat is equipped with an ISOFIX System, it can also be installed in vehicles without ISOFIX anchorage points. In this event the ISOFIX System can be stored in the booster at the base of the car seat. The child and the car seat can then both be secured using only the 3-point vehicle belt.

        How can I clean my car seat?

        Car seats can be cleaned using a vacuum cleaner or damp cloth. Sand or other dirt beneath the cover can also be removed in this way. To clean the plastic parts of the car seat wipe them with a cloth using a mild detergent and warm water. (Warning: Please do not use chemical detergents or bleaching agents under any circumstances.) Please note that a car seat should never be dismantled for cleaning. Please always refer to your car seat’s user manual when carrying out care and maintenance on your car seat. Generally the seat covers are machine washable at a maximum temperature of 30˚C on a delicate cycle. If you wash them at a higher temperature, the cover fabric might lose its color or shrink. Please wash the cover separately and never dry it by machine or in direct sunlight. (Warning: Only the cover of the car seat can be machine washed. The car seat itself is not machine washable.) Should you wish to clean a car seat more thoroughly than recommended above, you will have to have it cleaned professionally. Please ask the retailer who sold you the car seat to refer you to a professional service.

        Installation and Securing your child

        How should the headrest be adjusted?

        Only a headrest adjusted to the optimum height will give your child the best possible protection and comfort. The height can be adjusted to various positions. The headrest must be adjusted so there is no more than 2 cm between the child’s shoulders and the bottom of the headrest.

        Can I use the car seat on laterally-facing vehicle seats?

        It is not permitted to use the car seat on laterally-facing vehicle seats.

        Can I use the car seat on rear-facing vehicle benches (e.g. in vans or minibuses)?

        Yes. You can use this car seat on rear-facing vehicle benches as long as the vehicle bench is approved for use by adults and has a 3-point vehicle belt. The headrest of the vehicle bench should not be removed when fitting on a rear-facing seat.

        What should I bear in mind when installing the car seat in my vehicle?

        Before purchasing the car seat it is important to check if it is approved to be used in your vehicle. We advise referring to the Car Compatibility Checker on the CYBEX Website to find out whether the car seat is compatible with your vehicle. Compatibility can also be checked with the Typelist that can be found attached to your car seat (please do not use any part of this car seat on its own or in combination with boosters, backrests or headrests from other manufacturers or from different CYBEX product lines). The car seat can be used only on vehicle seats which are equipped with an automatic 3-point vehicle belt. For proper protection of your child, it is essential to use and install the car seat according to the instructions given in the User Guide. The User Guide can be found attached to the car seat, or it can be downloaded on the CYBEX Website.

        The ISOFIX System is impossible or very difficult to release from the ISOFIX anchorage points in the vehicle. What can I do?

        Sometimes the ISOFIX System may be difficult to release from the anchorage points. Please increase the distance between the car seat and the vehicle seat by releasing the ISOFIX using the adjustment buttons and pulling the car seat away from the vehicle seat. By following these steps, you will release any tension from the System which should help with the de-installation.

        Where should I install a car seat in my car?

        The safest place for a car seat is in the rear seat behind the front passenger seat. It may be possible to install a CYBEX car seat on other seats in the vehicle. You can find this information in our vehicle Type List which is available either online or along with the product when it is purchased.

        Safe Travel

        Can I use the car seat even when the side airbag is activated?

        Yes, the side airbag can remain activated when using the car seat.

        Are both side-impact protectors (L.S.P.s) needed?

        The Linear Side-impact Protection (L.S.P.) reduces the forces of a side-impact collision and thus also the risk of injury. The L.S.P. folds out automatically during product unboxing on both sides. However, if there is insufficient space for the L.S.P. nearest the middle of the vehicle, it is not absolutely essential. For safety reasons, please ensure that the L.S.P. nearest the door is always installed or folded out.

        Do high-back booster seats perform better than booster seats?

        When compared to booster seats, high-back booster seats considerably reduce the risk of injury. Booster seats do not provide proper protection from side-impacts, whereas a high-back booster seat is equipped with side protection. This protects the child from injury in the case of a side collision. High-back booster seats also include a shoulder belt routing which can be adjusted to the height of the child, further improving their travelling safety.

        What's the difference between UN R44 and UN R129?

        To simplify the process of choosing the right car seat, regulations and norms have been implemented to guarantee general safety standards worldwide. In most parts of the world including Europe, the UN R44/04 and UN R129 testing standards are in effect. R44 classifies child restraints (car seats) according to the weight of the child. However, children grow in different ways. For example, a child might be within the weight range of an R44 seat but their head may already be reaching above the top of the seat. On the other hand, R129 child restraints are classified according to the height of the child, and also specify a weight limit. This is intended to give parents more confidence that a child restraint will fit a child during a specific growth period. The aim of R129 is to make child restraints easier to install, to incorporate side impact testing to provide better protection from side crashes and to keep children in a rear-facing position up until they are at least 15 months old. It also aims to make child restraints more compatible with vehicle seats.

        When does a car seat expire?

        As soon as a car seat is installed in a vehicle, it may be exposed to high temperatures and high levels of light intensity. As a result, even high-quality and extremely age-resistant plastics such as those used by CYBEX can display certain age-related alterations. To ensure the safety of your child, we strongly recommend that the seats are not used for longer than the prescribed usage periods. A car seat will be designed to keep your child safe for a specific period in their development, for example from birth to approximately 4 years old for a Sirona Series seat. Sometimes they can be used for longer, for example our products for babies and toddlers can also be used for a sibling. To find out the approximate lifespan of your CYBEX car seat, refer to the user manual or contact our Customer Service.

        Usage

        What kind of clothing should my child wear when seated in the car seat?

        Thick clothing prevents the harness/vehicle belt or impact shield from lying tight against the body of the child. Only a correctly adjusted restraint system can offer maximum protection. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets and clothing with hoods (e.g. hoodies) as well as hats should be avoided where possible. Once your child has been positioned in the car seat, he/she can be covered with an extra blanket for warmth.

        How do I detach the cover?

        The fabric cover has five parts which are fixed to the car seat with velcro, elastic bands or press studs. Once you have released the fasteners, the cover parts can be removed. First, undo the two press studs on the rear side of the frontal headrest cover part below the reclining headrest. Undo the velcro behind the reclining headrest as well. Then you can remove the first part of the headrest cover upwards. Activate the adjustment handle for the headrest and move it to one of the higher positions. Open the three press studs on the rear side of the headrest cover at the back of the car seat. Pull out the fabric at the decorative part surrounding the adjustment handle. Then pull the second headrest cover off forwards. Pull down the first, upper part of the backrest cover on the left and right side panel of the shoulder rest at the backside of the car seat and pull out the fabric at the decorative part surrounding the L.S.P. Then you can pull the cover off forwards. Remove the second, lower part of the backrest cover by pulling it forwards. Thread the six elastic bands out on the underside of the booster, undo the two press studs at the back and pull off the booster cushion cover forwards.

        Functionality

        What are the two main positions for the reclining headrest?

        The patented reclining headrest is a passive safety feature from CYBEX. If your child is awake, you can set the recline angle of the headrest to the upright position. If your child is asleep, you can set the angle of the headrest to the reclined position. This prevents the child’s head from tipping forward into a vulnerable position while sleeping.

        How do I install the cup holder?

        Auf jeder Seite des Kindersitzes gibt es eine kleine Öffnung im Stoff des Sitzbezuges, die durch Nähte angezeigt wird. Ziehen Sie den Stoff des Sitzbezuges an dieser Stelle etwas auf und stecken Sie den Getränkehalter in die vorgesehene Öffnung. Zum Entfernen ziehen Sie den Getränkehalter nach oben.

        How can I close the L.S.P.?

        The Linear Side-impact Protectors have been developed to provide optimum protection in the event of a side impact. We highly recommend using the Linear Side-impact Protection element on the vehicle door side. Nevertheless there might be situations (e.g. not enough space in the vehicle, or a passenger sitting directly next to the car seat) where it’s necessary to close one of the L.S.P. elements. It can be closed by pushing the L.S.P element backwards, hold it pressed back and then press it in. (For more information check the User Guide of your car seat). For re-opening the push on the L.S.P. is sufficient.