-
Novinka
Klepnout
Stáhnout prsty k sobě
pro přiblížení
Color:
Stone Grey (Plus)
CYBEX Gold
Solution G2
Skládací a lehká dětská autosedačka Solution G2 kombinuje přenosnost s pokročilými bezpečnostními funkcemi, jako je sklopná opěrka hlavy. Rozvíjejte bezpečnost trvající celé dětství s modelem Solution G2, který je nástupcem vítězného modelu Solution G i-Fix z testů ADAC.
- Věk 3 r. - přibližně 12 r.
- Hmotnost 15 kg - 50 kg
- Regulation UN R129/04
- 100 - 150 cm
K dispozici
€ 239,95
včetně DPH, na krátkou chvíli je doprava zdarma
včetně DPH, na krátkou chvíli je doprava zdarma
48 bodů za nákup tohoto produktu
Doprava zdarma
Členství je zdarma
1 Ocenění
Klepnout
Stáhnout prsty k sobě
pro přiblížení
Kód produktu:
524000667 (Stone Grey (Plus))
Informace o produktu
Specifikace:
- Věkový rozsah: Od přibližně 3 do 12 let
- Výška dítěte: 100–150 cm
- Hmotnost dítěte: Od přibližně 15 kg do 50 kg
- Schvalovací předpis: UN R129/04
Small Fold Genius
Přestupování mezi auty se právě stalo jednodušším díky skládacímu modelu Solution G2: nástupci modelu Solution G i-Fix, který získal nejlepší výsledek v testu ADAC pro autosedačku s vysokým podsedákem. Ideální pro moderní život, lze ji snadno přepínat mezi auty nebo si ji vzít s sebou do taxíku, metra či na dovolenou. Je vybavena pohodlnou rukojetí pro přenášení a navíc je samostatně stojící a kompaktní pro skladování, což je zárukou maximální praktičnosti. Jak dítě roste, flexibilní boční opěrky se přizpůsobují, aby poskytla více prostoru. A sklopná opěrka hlavy může sedmkrát¹ zvýšit bezpečnost hlavy, zatímco Lineární systém ochrany při bočním nárazu Plus snižuje sílu nárazu až o 20 % – bezpečnější cestování a klid na duši.
Pokyny k údržbě:
- Textilní potahy lze prát v pračce na 30 °C
Kompatibilní s:
- Letní potah
- Držák nápojů k autosedačce
- Naváděcí plasty ISOFIX
Odkazy
¹Ve srovnání s hlavou mimo bezpečnostní zónu se stejným výrobkem (HIC 36), při zkoušce bočního nárazu ADAC (27 km/h)
²Ve srovnání se stejnou autosedačkou bez systému L.S.P.
Až 7x bezpečnější pro hlavu
Hlava dítěte je v autosedačce až sedmkrát bezpečnější než mimo ni. Naše sklopná opěrka hlavy pomáhá udržet hlavu v této ochranné zóně, takže vaše dítě může spát v maximálním bezpečí a pohodlně cestovat..
Sklopení během několika sekund
Model Solution G2 lze rychle složit do kompaktního tvaru, který zabere až o třetinu méně místa než v rozloženém stavu. Je dostatečně kompaktní, abyste ho mohli snadno uložit do kufru auta nebo vzít domů. Váží pouhých 5,8 kg a je vybaven praktickou rukojetí na přenášení, takže se snadno přenáší při cestování metrem, na dovolené nebo při přestupování mezi auty.
O 20 % lepší ochrana při bočním nárazu
Integrovaná skořepina tlumící náraz pomáhá systému lineární ochrany při bočním nárazu Plus přesměrovat až o 20 % větší sílu bočního nárazu směrem od dítěte.
Videos
Měření
Rozměry – rozložený
- Délka
- 380 mm
- Šířka
- 590 mm
- Výška
- 550 - 800 mm
- Hmotnost
- 5.8 kg
Rozměry – složená
- Délka
- 590 mm
- Šířka
- 260 mm
- Výška
- 550 mm
- Hmotnost
- 5.8 kg
Co je součástí balení?
- Autosedačka Solution G2
- Uživatelská příručka (příručka pro rychlý start a přístup k digitální příručce)
Zkontrolujte kompatibilitu svého vozu
Chcete-li ověřit, zda lze tuto autosedačku nainstalovat do vašeho vozu, použijte náš nástroj pro ověření kompatibility s vozidly.
Bezpečnostní pás automobilu + ISOFIX
Doporučeno
Tato autosedačka se instaluje do vozidla s pomocí bezpečnostního pásu vozu. Volitelné připojení ISOFIX zaručuje bezpečnost, stabilitu a snadnější instalaci.
Bezpečnostní pás
Pokud váš automobil nemá ISOFIX, můžete tuto autosedačku nainstalovat také s pomocí 3bodového bezpečnostního pásu sedadla vozu.
editorial-content-downloads-title
Will this car seat fit in my vehicle?
It is important to check whether the car seat is compatible with your vehicle before you purchase it. This car seat can generally be installed on any vehicle seat that has a 3-point belt, with the ISOFIX locking arms stored away. The car seat should also be compatible with all i-Size vehicle seats using ISOFIX. In both cases we recommend using the Car Compatibility List to verify if your vehicle has been tested and is compatible with this car seat. To access the Car Compatibility List, follow the relevant weblink in the Quick Start Guide, printed on the packaging box or find it on the product page of the CYBEX website. If vehicle is not listed, please contact our customer service for further assistance.
Can I use this car seat on a flight?
No, this car seat is not approved for use on an airplane.
Is it normal that the car seat’s backrest moves, and there is space between vehicle seat and car seat?
Yes, the backrest is adjustable. Therefore it can adapt perfectly to any vehicle seat. In the event of an accident, the backrest moves slightly forward with your child, and is therefore able to secure the whole body early on.
Is it ok to keep using a car seat after an accident?
We at CYBEX strongly recommend that you replace a car seat after any kind of accident. This is because tiny hairline cracks, which may not be visible to the naked eye, can appear in the plastic parts of a car seat after an accident. These cracks can pose an increased risk to safety.
My car seat is faulty, how can I get it repaired?
Please refer to the retailer where you bought your CYBEX car seat. They will deal with the matter on your behalf.
Where can I get replacement parts for my product?
You can order replacement parts from a specialist retailer near you. To find a store near you, simply go to the Store Locator on the CYBEX Website.
How do I correctly secure my child in the seat?
Please observe the instructions in the User Guide. Adjust the child car seat to the size of your child and make sure that he or she is properly strapped in to ensure maximum safety.
Is it possible to use a car seat with an ISOFIX System in a vehicle without ISOFIX anchorage points?
While this CYBEX car seat is equipped with an ISOFIX System, it can also be installed in vehicles without ISOFIX anchorage points by turning the ISOFIX locking arms 180° inwards and sliding them into the booster seat. Both the child and the car seat can then be secured using only the 3-point vehicle belt.
How can I clean my car seat?
Car seats can be cleaned using a vacuum cleaner or damp cloth. Sand or other dirt beneath the cover can also be removed in this way. To clean the plastic parts of the car seat wipe them with a cloth using a mild detergent and warm water. (Warning: Please do not use chemical detergents or bleaching agents under any circumstances.) Please note that a car seat should never be dismantled for cleaning. Please always refer to your car seat’s User Guide when carrying out care and maintenance on your car seat. Generally the seat covers are machine washable at a maximum temperature of 30˚C on a delicate cycle. If you wash them at a higher temperature, the cover fabric might lose its color or shrink. Please wash the cover separately and never dry it by machine or in direct sunlight. (Warning: Only the cover of the car seat can be machine washed. The car seat itself is not machine washable.) Should you wish to clean a car seat more thoroughly than recommended above, you will have to have it cleaned professionally. Please ask the retailer who sold you the car seat to refer you to a professional service.
Is it okay to install this car seat on the passenger seat?
We generally recommend using the car seat on one of the back seats of the vehicle. Statistically, installing the car seat on the passenger seat poses a higher risk of injury for your child. However, in exceptional cases the car seat may be used on the passenger seat as well. Please note the following: if the car is equipped with an airbag, put the passenger seat as far back as possible. Please ensure that the upper belt point of the 3-point vehicle belt always stays behind the belt routing of the car seat, so that the belt runs backwards and not forwards. To find out whether a specific CYBEX car seat can be installed on the passenger seat, please use the Car Compatibility Tool on the CYBEX website.
How should the headrest be adjusted?
Only a headrest adjusted to the optimum height will give your child the best possible protection and comfort. The height can be adjusted to various positions. The headrest must be adjusted so there is no more than 2 cm between the child’s shoulders and the bottom of the headrest.
Can I use the car seat on laterally-facing vehicle seats?
It is not permitted to use the car seat on laterally-facing vehicle seats.
Can I use the car seat on rear-facing vehicle benches (e.g. in vans or minibuses)?
Yes. You can use this car seat on rear-facing vehicle benches as long as the vehicle bench is approved for use by adults and has a 3-point vehicle belt. The headrest of the vehicle bench should not be removed when fitting on a rear-facing seat.
The ISOFIX System is impossible or very difficult to release from the ISOFIX anchorage points in the vehicle. What can I do?
Sometimes the ISOFIX System may be difficult to release from the anchorage points. Please increase the distance between the car seat and the vehicle seat by releasing the ISOFIX using the adjustment buttons and pulling the car seat away from the vehicle seat. By following these steps, you will release any tension from the System which should help with the de-installation.
Where should I install a car seat in my car?
Although it may be possible to install a CYBEX car seat on other seats in the vehicle, the safest place for a car seat is in the rear seat, behind the front passenger seat. We advise you to refer to the Car Compatibility Tool on the CYBEX Website. You can scan the dedicated QR-Code on your Quick Start Guide or use the specific weblink, provided on the Packaging Box, to access the Car Compatibility Tool for your product.
What should I bear in mind when installing the car seat in my vehicle?
What should I bear in mind when installing the car seat in my vehicle?
Can I use the car seat even when the side airbag is activated?
Yes, the side airbag can remain activated when using the car seat.
Are both side-impact protectors (L.S.P.s) needed?
The Linear Side-impact Protection (L.S.P.) reduces the forces of a side-impact collision and thus also the risk of injury. Generally, we advise parents to install or fold out the L.S.P. on both sides of the car seat. However, if there is insufficient space for the L.S.P. nearest the middle of the vehicle, it is not absolutely essential. For safety reasons, please ensure that the L.S.P. nearest the door is always installed or folded out.
Do high-back booster seats perform better than booster seats?
When compared to booster seats, high-back booster seats considerably reduce the risk of injury. Booster seats do not provide proper protection from side-impacts, whereas a high-back booster seat is equipped with side protection. This protects the child from injury in the case of a side collision. High-back booster seats also include a shoulder belt routing which can be adjusted to the height of the child, further improving their travelling safety.
When does a car seat expire?
As soon as a car seat is installed in a vehicle, it may be exposed to high temperatures and high levels of light intensity. As a result, even high-quality and extremely age-resistant plastics such as those used by CYBEX can display certain age-related alterations. To ensure the safety of your child, we strongly recommend that the seats are not used for longer than the prescribed usage periods. A car seat will be designed to keep your child safe for a specific period in their development, for example from birth to approximately 4 years old for a Sirona Series seat. Sometimes they can be used for longer, for example our products for babies and toddlers can also be used for a sibling. To find out the approximate lifespan of your CYBEX car seat, refer to the User Guide or contact our Customer Service.
What's the difference between UN R44 and UN R129?
To simplify the process of choosing the right car seat, regulations and norms have been implemented to guarantee general safety standards worldwide. In most parts of the world including Europe, the UN R44/04 and UN R129 testing standards are in effect. R44 classifies child restraints (car seats) according to the weight of the child. However, children grow in different ways. For example, a child might be within the weight range of an R44 seat but their head may already be reaching above the top of the seat. On the other hand, R129 child restraints are classified according to the height of the child, and also specify a weight limit. This is intended to give parents more confidence that a child restraint will fit a child during a specific growth period. The aim of R129 is to make child restraints easier to install, to incorporate side impact testing to provide better protection from side crashes and to keep children in a rear-facing position up until they are at least 15 months old. It also aims to make child restraints more compatible with vehicle seats.
What kind of clothing should my child wear when seated in the car seat?
Thick clothing prevents the harness/vehicle belt or impact shield from lying tight against the body of the child. Only a correctly adjusted restraint system can offer maximum protection. For this reason, your child should wear everyday clothing. Thick clothing such as winter jackets and clothing with hoods (e.g. hoodies) as well as hats should be avoided where possible. Once your child has been positioned in the car seat, he/she can be covered with an extra blanket for warmth.
What is the maximum diameter of a bottle to still fit in the cup holder?
The diameter of a bottle should not be larger than 7 cm.
What are the two main positions for the reclining headrest?
The reclining headrest is a passive safety feature from CYBEX. If your child is awake, you can set the recline angle of the headrest to the upright position and when they are asleep, you can set the angle to the reclined position. This prevents the child’s head from tipping forward into a vulnerable position while sleeping and keeping it up to seven times safer.
How does the folding feature work?
The Solution G2 folds to make it a much more manageable, carry-friendly size, perfect when switching between cars or for storage for example. To unfold it, pull the adjustment handle and open the backrest until you hear an audible click, and it’s now ready to be installed in the car. To fold, you need to remove the cup holder if you have one attached. Now you need to pull the adjustment handle at the front of the booster and fold the backrest over until you hear an audible click. You can now use the helpful carrying handle located on the back of the car seat to carry it.
How do I install the cup holder?
You can easily install the cup holder by sliding it into one of two slots in the car seat shell, positioned on the side of the booster part of the seat. The positions of the slots are indicated by cup holder symbols.
How do I remove the car seat fabrics?
Your car seat’s covers consist of 4 individual parts which have been cleverly designed to allow them to be easily removed separately for washing or if they need replaced. Open the velcro fastener which you will find behind the reclining headrest to remove by pulling it upwards from the reclining headrest flap. To remove the main headrest cover, reach below the headrest wings and unhook the loop fasteners and pull off the cover. Removing the fabric that covers the backrest is much easier if you fold the car seat and then release the fabric at the 6 corner point edges (4 on the backrest & 2 on the booster). If you then unfold the car seat again, the backrest cover should pull off easily. You can then release the two elasticated fasteners underneath the booster, remove the fabric around the armrest and the booster cover should pull off easily. To reattach the covers, do the above in reverse order. You can find washing instructions in your product’s User Guide.
How does the recline position work?
The recline position is easily adjustable with only one hand, allowing for a more comfortable position for the child. The recline position can only be adjusted when the child is not sitting in the car seat, therefore please adjust the position before or after starting your journey. The relevant ISOFIX adjustment handle is conveniently located on the front side of the seat and to change the recline position, please pull the handle and push or pull the car seat into the desired position.
Reklamace záruky
Pokud chcete uplatnit reklamaci v rámci záruky, obraťte se prosím na prodejce, u kterého jste výrobek CYBEX zakoupili.
Pokud jste produkt zakoupili přímo v oficiálním CYBEX Online Shopu, použijte prosím náš kontaktní formulář a spojte se s námi.
Náhradní díly (mimo záruku)
Pokud sháníte náhradní díly a váš produkt již není v záruce, kontaktujte prosím autorizovaného prodejce CYBEX ve vašem okolí. Můžete ho najít pomocí našeho vyhledávače prodejen .
Nejste si jisti, zda je váš produkt stále v záruce? V tom případě nás klidně kontaktujte – rádi vám pomůžeme.
-
Nepomohlo
-
Skvělé
Byla tato stránka užitečná?
Ohodnoťte ji smajlíkem – vždy se snažíme zlepšovat. Vaše zpětná vazba je důležitá.